A8 Quattro Sedan V8-4.2L (BVJ) (2008)
Specified value: 12.0 to 20.0 ohms (at approx. 20 °C)
If the specified value was not obtained:
-
Replace the faulty Fuel Injector.
If the specified value was obtained:
Checking activation
-
Connect a diode test lamp (12V) to the Fuel Injector electrical harness connector terminals 1 and 2 of the Fuel Injector to be tested.
-
Operate the starter and test the activation of the Fuel Injector.
LED should flicker.
-
Switch the ignition off.
If LED flickers:
-
Replace the faulty Fuel Injector.
If LED does not flicker:
Checking activation and wiring
If the manufacturers test box is being used. Perform the following step.
-
Install the test box.