A8 Quattro Sedan V8-4.2L (BVJ) (2008)
Electronic Throttle Control Module: Service and Repair
Accelerator Pedal Module with Throttle Position Sensors
Accelerator Pedal Module with Throttle Position Sensors
Removing
-
Remove driver-side storage compartment. Refer to => Body Interior 68 Description and Operation.
-
Separate the electrical connector - 2 -.
-
Remove bolts - 1 - and - 3 -.
-
Remove accelerator pedal module.
Installing
‹› Tightening specifications. Refer to => [ Accelerator Pedal Mechanism Assembly Overview ] See: Computers and Control Systems/Electronic
Throttle Actuator/Service and Repair/Accelerator Pedal Mechanism Assembly Overview.
Installation is in reverse order of removal, note the following:
-
Install driver-side storage compartment. Refer to => Body Interior 68 Description and Operation.