A8 Quattro Sedan V8-4.2L (BVJ) (2008)
Transmission Position Switch/Sensor: Service and Repair
Tiptronic Switch
‹› The Tiptronic Switch (F189) is a component of the circuit board.
‹› The Tiptronic Switch (F189) solenoid is secured on the cover strip.
Removing
-
Remove selector lever handle => [ Selector Lever Handle ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter
A/T/Service and Repair/Removal and Replacement/Selector Lever Handle.
-
Remove cover for shift mechanism => [ Selector Mechanism Cover ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter
A/T/Service and Repair/Removal and Replacement/Selector Mechanism Cover.
-
Press frame - B - together at center area - arrows - as remove cover molding - A - at the same time.
-
Carefully pry out retaining tabs - arrows A - and - arrows B - (retaining tabs are covered).
-
Remove guide and cover strip with Tiptronic Switch (F189) from frame.
‹› The circuit board - 1 - can only be replaced together with the frame.
‹› The Tiptronic Switch (F189) solenoid can only be replaced together with the cover strip.
‹› If the retaining tabs are damaged, the guide must be replaced.
Installing