A8 Quattro Sedan V8-4.2L (BVJ) (2008)
Steering Column Control Module: Service and Repair
Steering Column Switch Module
Steering Column Switch Module
Steering Column Switch Module
Special tools, testers and auxiliary items required
‹› T8 screwdriver (T40056 A)
Removing
Follow safety precautions when working on knee airbag.
-
Remove driver's storage compartment.
-
Adjust steering wheel downward and to rear as far as possible, use entire adjustment range of steering column adjustment for this.
Contrary to the procedure described in "Battery, disconnecting and connecting", the ignition must be on and remain on while
disconnecting the battery when working on airbag components.
-
Remove airbag unit.
-
Remove steering wheel.
-
Remove bolts - 3 - and - 5 - using (T40056 A).
-
Remove the TORX bolts - 6 - and the hex socket head bolt - 4 -.
-
Separate top trim - 2 - for steering column switches from bottom trim - 1 - and remove both parts.
-
Remove bolt - 2 -.