A8 Quattro Sedan V8-4.2L (BVJ) (2008)
Rear Cross-Member: Service and Repair
Front Suspension
Front and Rear Crossmembers
Special tools, testers and auxiliary items required
‹› Torque wrench (5-50 Nm) (VAG 1331)
Front Crossmember
-
Mark the location of the front crossmember - 1 -.
-
Remove the bolts - 2 -.
-
Remove the front crossmember - 1 -.
Installation is performed in the reverse order of removal.
-
Note the location of the front crossmember - 1 -.
-
Bolt - 2 - tightening specification. Refer to - item 2 - in => [ Crossmembers and Tower Brace Assembly Overview ] See: Service and
Repair/Removal and Replacement/Front Suspension/Crossmembers and Tower Brace Assembly Overview.
Rear Crossmember
-
Mark the location of the rear crossmember - 1 -.