A8 Quattro Sedan V8-4.2L (BVJ) (2008)
-
Tighten the bolt - 5 - and nut - 2 - by hand.
‹› Ignore items 1, 3 and 4 in the illustration.
-
Install a new tie rod. Refer to => [ Tie Rod ] See: Cross-Member/Rear Cross-Member/Service and Repair/Rear Suspension/Tie Rod.
-
Tighten the bolt - 5 -. Refer to - item 33 - in => [ Stabilizer Bar, Track Control Arm, Tie Rod, Coupling Rod, Connecting Link, Trailing Arm and
Level Control System Sensor Assembly Overview ] See: Stabilizer Bar, Track Control Arm, Tie Rod, Coupling Rod, Connecting Link, Trailing
Arm and Level Control System Sensor Assembl.