A8 Quattro Sedan V8-4.2L (BVJ) (2008)
/Page-2432003.png)
-
Make sure the pressure does not exceed 4.5 bar when filling.
-
Disconnect the (VAS 6231) from the (T10157), gas escapes at a pressure above 3.5 bar.
Minimum pressure is now reestablished. You can remove the air spring damper from the packaging.
-
After installation, drive the vehicle at high ride height and then at normal ride height. Repeat this sequence once more.
By moving the ride height settings twice, the majority of the gas is exchanged with filtered air from the air supply motor.
-
Install the air spring damper. Refer to => [ Installing ] See: Removal and Replacement/Front Suspension/Air Spring Damper.
