A8 Quattro Sedan V8-4.2L (BVJ) (2008)
-
Remove the nut - 3 -.
-
Push the wheel bearing housing down by hand and remove the bolt - 4 - from the air spring damper/ track control arm.
-
Insert a wood block in the subframe - arrow 1 - and support on the wheel bearing housing - arrow 2 -.
-
Press the wheel bearing down using the wood block - arrow 3 - until the air spring damper - arrow 4 - can be removed toward the rear.
A second technician is needed to pull the air spring damper fork back.
-
Place a folded cloth between the air spring damper and the track control arm.
-
Release the wheel bearing housing slowly. Do not place the air spring damper - 1 - on the parking brake housing - 3 - or stabilizer bar - 2 - when
doing so.