A8 Quattro Sedan V8-4.2L (BVJ) (2008)
/Page-1639003.png)
-
Install driveshaft and fit bolts for CV joints.
-
Make sure that the markings on the driveshaft flange - arrow A - and the rear final drive - arrow B - are aligned.
-
Attach the driveshaft to the rear final drive with new bolts - arrows -.
-
Tighten bolts - 1 - on the front and rear ends of the driveshaft to tightening specification - 5 - => [ Hex Socket Head Bolt ] See: Drive Shaft
Assembly Overview.
-
Use the (T10172) with the (T10172/5) to do this.
