A8 Quattro Sedan V8-4.2L (BVJ) (2008)
-
Use the special tool shown in the illustration.
Instead of (T10065/2) conical axle shafts, cylindrical axle shafts (T10065/3) are used.
Triple Roller Star, Pressing Onto the Axle Shaft
-
Before installing the triple roller star, the splines - A - must be lightly coated with grease used in the joint piece.
-
Place the triple roller star on the axle shaft according to the mark and drive on until impact.
This illustration only applies to conical axle shafts - arrow -.