A8 Quattro Sedan V8-4.2L (BVJ) (2008)
-
Press the joint piece over the triple roller star using a plastic hammer.
-
Press the remaining quantity of grease into the CV joint boot.
-
Make sure that correct seating of the boot on CV joint.
-
The boot must fit in groove and on joint contour.
-
Position the joint piece in the center position. See the "min - max" position.
‹› Vent the CV joint boot - arrow -, for example, using a screwdriver, while positioning the joint piece in the center position.
-
Install the clamp.