A8 Quattro Sedan V8-4.2L (BVJ) (2008)
‹› Removing => [ Removing the Seal from the Driveshaft Flange ] See: Drive Pinion
‹› Installing => [ Driveshaft Flange Seal, Installing ] See: Drive Pinion
4
O-ring
‹› Always replace
‹› Installing the gear oil => [ O-ring, Installing ] See: Drive Pinion
5
Inner Race/Small Tapered Roller Bearing*
‹› Removing the pinion => [ Removing the Pinion from the Inner Race/Tapered Roller Bearing ] See: Drive Pinion
‹› Installing => [ Installing the Inner Race/Small Tapered Roller Bearing ] See: Drive Pinion
6
Outer Race/Small Tapered Roller Bearing*
‹› Removing => [ Removing the Outer Race/Small Tapered Roller Bearing ] See: Drive Pinion
‹› Installing => [ Installing the Outer Race/Small Tapered Roller Bearing ] See: Drive Pinion
7
Spacer Sleeve*
‹› Always replace
8
Rear Axle Housing*
9
Shim S3
‹› Write down the thickness
‹› For the adjustment overview, refer to => [ Adjusting Overview ] See: Pinion and Ring Gear, Adjusting
10
Large Outer Race/Tapered Roller Bearing*
‹› Removing => [ Removing Outer Race/Large Tapered Roller Bearing ] See: Drive Pinion
‹› Installing => [ Installing the Outer Race/Large Tapered Roller Bearing ] See: Drive Pinion
11
Inner Race/Large Tapered Roller Bearing*
‹› Removing => [ Removing the Inner Race/Large Tapered Roller Bearing ] See: Drive Pinion
‹› Installing => [ Installing the Inner Race/Large Tapered Roller Bearing ] See: Drive Pinion
12
Pinion*
‹› Paired with the ring gear
‹› Replace both