A8 Quattro Sedan V8-4.2L (BVJ) (2008)
/Page-1611009.png)
Use the (VAS 6222) and the (SW 36) to measure the friction torque.
Adjust the Following Friction Torques:
*
Driven at least 50 km
Pinon Nut, Securing
-
Secure the pinion nut.
-
Measure the radial run-out on the driveshaft flange. Refer to => [ Radial Run-Out on Flange/Driveshaft, Measuring and Identifying ] See:
Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Testing and Inspection.
