A8 Quattro Sedan V8-4.2L (BVJ) (2008)
Fluid - Transfer Case: Removal and Replacement
Self-Locking Center Differential
Self-Locking Center Differential
Special tools, testers and auxiliary items required
‹› Carrier Bearing Inst. Tool (3350)
‹› Engine/Transmission Jack (V.A.G 1383 A)
‹› Bolt M12x100 with nut
Removing
‹› The removal and installation is described on a vehicle with 10-cylinder FSI engine. FSI engine description.
-
Loosen quick-release connectors - 1 - and - 2 - and remove noise insulation.
-
Remove the left Y-pipe.
-
Remove the driveshaft heat shield - A - - arrows -.