A8 Quattro Sedan V8-4.2L (BVJ) (2008)
-
Secure self-locking center differential - B - and baffle - A - against falling out or remove from output shaft toward rear.
Installing
Install in reverse sequence; note the following points:
‹› Replace transfer case cover O-ring.
If the self-locking center differential - B - and baffle - A - were removed:
-
Clean baffle, lubricate with gear oil and insert into transmission.
‹› Installation position: The plate - A - on baffle must be secured with side tabs via opening - B - on transmission.
-
Place self-locking center differential - B - on output shaft splines while rotating slightly.