A8 Quattro Sedan V8-4.2L (BVJ) (2008)
-
Remove coolant expansion tank mount - 1 - from plenum chamber.
All Vehicles
-
Remove bolts - arrows - and remove entire wiper frame.
-
Disconnect electrical connector - 1 -.
Installing
Install in reverse order of removal, observing the following:
-
Install wiper motor with wiper frame in vehicle.
-
Install the dome brace.
Vehicles with Coolant Expansion Tank in Plenum Chamber
-
Install mount and coolant expansion tank.
-
Install rear section of left front wheel housing liner.
-
Fill coolant.
All Vehicles
-
Adjust wiper arms. Refer to => [ Windshield Wiper Arms, Adjusting ] See: Wiper Arm/Adjustments.
Tightening Specifications