A8 Sedan V8-3.7L (AEW) (1997)
-
Snap hinged clip - 2 - into activation lever - 1 -.
-
Insert lock cylinder locking rod - 3 - into hinged clip and snap into place.
-
Swivel operating clip - 4 - 1/4 turn (90 degrees), insert into lock activation lever - 5 - and swivel back toward top.
-
Clip lock cylinder locking rod into operating clip free of play without putting tension on door lock activation lever.
Max. play: 1 mm
-
Slide sleeve up onto operating clip.
Fig. 2 Removing And Installing Bowden Cable For Inside Door Mechanism
-
Disengage hook - 3 - from activation lever - 4 -.
-
Turn end piece of Bowden cable 1/4 turn (90 degrees) (tab - 2 - unclips) and pull out bottom of bracket - 1 -.
-
Note engagement direction of Bowden cable when installing.