A8 Sedan V8-3.7L (AEW) (1997)
Front Door Panel: Service and Repair
Front Door Trim, Removing and Installing
Front Door Trim, Removing And Installing
Removing
-
Pry trim plate - 3 - at door trim from retaining clips carefully.
-
Press pin - 1 - of expanding clip - 2 - approx. 4 mm and remove expanding clips.
NOTE:
-
Do not press pins completely to remove door trim.
-
Depending on design status, Phillips-head screws can be used instead of expanding clips.
-
Pry off lower part of handle well using dull screwdriver (arrow).
-
Remove lower part of handle well from door trim.
-
Remove screws - 3 - for handle well upper part - 2 -.
-
Remove handle well-upper part from the top out of door trim - 1 -.
NOTE: For one part handle well upper part, the front part of the handle well upper part (with switches) must be unclipped from the door trim and
connectors disconnected.