A8 Sedan V8-3.7L (AEW) (1997)
6
-
Operating rod
Removing:
-
Rotate hinged clip - 7 - and pull off operating rod.
-
Slide sleeve on operating operating clip - 5 - down and press out operating rod.
Installing:
-
Adjust play between door handle and door lock by rotating operating rod in operating clip.
-
Activation level must not be put under tension while adjusting.
-
Play between activation lever and operating part: max. 1 mm
7
-
Hinged clip
Fig. 1 Removing Face Plate For Door Handle
-
Lift door handle.
-
Pry mounting unit off door handle using small screwdriver in direction of arrow and remove.
-
Remove face plate for door handle.
NOTE: Illustrated in removing driver's side door handle.