A8 Sedan V8-3.7L (AEW) (1997)
Water Pump: Service and Repair
NOTE: During removal and installation procedures, refer to the component location illustration above and component notes below.
Component Notes and Information
1
Coolant Pump
2
Gasket
3
Torx Bolt, tighten to: 10 Nm (7 ft. lbs.).
Removal
1. Remove camshaft timing belt, refer to Timing Belt, Service and Repair, Camshaft Drive Belt, Removing & Installing See: Engine/Timing
Components/Timing Belt/Service and Repair
2. Unbolt timing belt tensioning device.
3. Remove coolant pump (9 Torx bolts).
Installation
Reverse removal to install.