audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Oil Cooler, Engine > < Engine Oil|Capacity Specifications|Page 1509
Page 1
background image

Engine Oil: Testing and Inspection

Oil level, checking

^

Engine warm-oil temperature greater than 60°C (140°F)

^

Vehicle on level ground

^

After stopping engine, wait a few minutes to allow the oil to flow back into the pan.

-

Withdraw dipstick, wipe off with clean rag and fully re-insert.

-

Withdraw dipstick again and read oil level.

Range of markings on dipstick:
a - Oil MUST NOT be topped off 
b - Oil may be topped off
After topping off oil, it is sufficient for the oil level to be somewhere in range -a- Oil MUST BE topped off
After topping off oil, it is sufficient for the oil level to be somewhere in range -b- (shaded area)
After topping off oil, it is sufficient for the oil level to be somewhere in range -c- (shaded area).

CAUTION:  Oil level must not exceed the "MAX" mark on the dipstick.

Oil Cooler, Engine > < Engine Oil|Capacity Specifications|Page 1509