audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Fuel Pressure Release > < Pressure|Page 2488
Page 2
background image

-

Disconnect vacuum hose (arrow) for fuel pressure regulator.

-

Fuel pressure must increase to approx. 4.2 bar (61 psi).

-

Switch ignition off.

-

Check residual pressure by observing pressure reduction.
After 10 minutes at least 3 bar (44 psi) pressure must still be indicated on gauge.

If residual pressure drops below 3.0 bar (44 psi):

-

Start engine and stop engine after fuel pressure has built up.

-

Close valve on fuel pressure gauge VAG1318.

If residual fuel pressure holds:

-

Connection between fuel pressure gauge and fuel pressure regulator leaking.

-

Fuel pressure regulator leaking; replace if necessary.

-

Fuel injectors leaking. Refer "Fuel injector","Fuel Injection Volume, Fuel Injector Leakage and Spray Pattern, Checking" See: Fuel
Injector/Testing and Inspection 

If residual fuel pressure drops again:

-

Connection between fuel pressure gauge and fuel supply line leaking.

-

Fuel supply line at fuel tank leaking.

-

Check valve in fuel pump leaking.

NOTE:  Before disconnecting the fuel pressure gauge, close the valve, disconnect line at VAG1318/12 adapter, and pour left-over fuel into suitable
container by opening valve.

Fuel Pressure Release > < Pressure|Page 2488