A8 Sedan V8-3.7L (AEW) (1997)
Accelerator Pedal Position Sensor: Service and Repair
Removing
-
Remove knee protection bar on drivers side
-
Remove left front floor mat.
-
Unscrew nut -3-.
-
Unscrew Allen bolt -2-.
-
Remove A-pillar trim bottom left -1-.
-
Remove left air channel below instrument cluster.
-
Disconnect operating rod -1- from accelerator pedal -2- -arrow-.
-
Unscrew accelerator pedal position sensor.
Installing
Installation is the reverse of removal; during installation observe the following.