A8 Sedan V8-3.7L (AEW) (1997)
1 - Rapid data transfer
2 - Blink code output
1) Operating modes 1 and 2 are displayed alternately
-
Press button -1- to select "Rapid data transfer" operating mode 1.
Indicated on display:
Rapid data transfer HELP
Insert address word XX
-
Press buttons -0- and -2- to insert "Transmission Electronics" address word 02.
Indicated on display:
Rapid data transfer Q
02 Transmission Electronics
-
Press -Q- button to confirm input.
Indicated or display (control module identification):
8D0927156N AG5 01V 3,71 2V US D74
Coding 00000 WSC 12345
TCM Identification:
The transmission control module identification is dependent on manufacture status (data status). A control module identification may appear which is
different than that in this example.
Example:
8D0927156N Part number
AG5 01V
Automatic transmission 5 speed 01V
3.71 2V
Engine type: 3.7 liter 2 valve
US
Market: USA
D74
EPROM (data status)
Coding 00000 Code: USA
WSC 12345 Dealership code of VAG 1551 scan tool with which last coding was carried out
CAUTION: Part numbers are listed here for reference only. Always check with your Parts department for the latest information.
If "Control module does not answer" is indicated on display:
-
A list of the possible malfunction causes can be printed out by pressing the HELP button.
After eliminating possible malfunction causes:
-
Again press buttons -0- and -2- to insert "Transmission Electronics" address word 02.
If "Control module does not answer" is again indicated on display:
-
Check power supply by conducting electrical test step 1. See: Transmission Control Systems/Testing and Inspection
-
Check wiring connection to DLC.
-
Check DTC table; DTC 65535, "Control Module Malfunctioning". See: Transmission Control Systems/Testing and Inspection
-
Press -> button.
Indicated on display:
Rapid data transfer HELP
Insert address word XX
-
A list of the possible functions can be printed out by pressing the HELP button.