A8 Sedan V8-3.7L (AEW) (1997)
^
Remove circlip (arrow -A-) for ball bearing.
^
Place left drive flange bracket on pressure plates VW 401 and VW 402 and press drive flange out of bracket using thrust piece VW 412.
^
Remove impulse wheel for speedometer VSS - G22- from drive flange or bracket.
Installing
^
Install impulse wheel for VSS -G22- (arrow) on drive flange and check installation position.
Notes:
^
The drivers on the impulse wheel must engage in the groove of the drive flange.
^
If necessary, apply Vaseline to the contact surface of the impulse wheel in order to keep it in proper position during installation.