A8L V8-4.2L (BFM) (2004)
‹› Pipe clamps point inward on vehicles with long wheel base. Depicted in the illustration.
‹› Pipe clamps point outward on vehicles with short wheel base.
6
Holes in assembly carrier
7
Rubber grommet
8
Guide tubes
9
Assembly carrier
10
Retaining tabs
-
Install guide sleeves - 1 -.
-
Install rear assembly carrier. While doing this guide shafts into guide sleeves (T40077) - 1 - from below.
-
Tighten bolts of assembly carrier. 3.5 Nm.