A8L V8-4.2L (BFM) (2004)
-
Make sure there is no dust or grease on the adhesive surface.
-
Clean the adhesive surface - 1 - with D 009 401 04 before installing.
-
Clip the seal - 2 - first to the top of the door.
-
Remove the protective file from the bottom up to the area where the impression is.
-
Attach the seal in the area around the impression.
-
Secure the formed part at the bottom and attach the seal completely.
-
Remove the rest of the protective film and attach the seal.
-
Press firmly on the seal.
-
Attach the seal at the bottom with the screw - 3 -.