A8L V8-4.2L (BFM) (2004)
Arm Rest: Removal and Replacement
One-Piece Center Armrest Padding, Removing and Installing
One-piece Center Armrest Padding, Removing And Installing
Removing
-
Remove center armrest.
-
Starting at bottom - arrow -, remove cover panel - 1 - off padding - 2 -.
-
Remove cover panel.
-
Press down retainer tabs - 1 -.
-
At same time, press mount - 2 - in direction of - arrow - until lugs of mount are disengaged from guides of padding - 3 -.
-
Remove padding from bracket with mount.
Installing
Install in reverse order of removal. Note following:
-
Make sure mount and padding fully engage.