A8L V8-4.2L (BFM) (2004)
Lock Carrier: Procedures
Lock Carrier Service Position
Lock Carrier Service Position
Special tools, testers and auxiliary items required
‹› Guide Rods (3411)
‹› For the service position, do not disconnect any refrigerant or coolant lines and no lines for hydraulic oil circuit.
‹› Electrical harness connectors must not be disconnected.
CAUTION!
Be careful not get any cables or hoses caught when installing the lock carrier. Refer to => [ Installing Lock Carrier ].
1
Lock Carrier
‹› Removal, refer to => [ Lock Carrier with Attachments Assembly Overview ] See: Removal and Replacement/Lock Carrier With Attachments
Assembly Overview.
‹› For service position, front wheel housing liner/front section removed.
‹› Bumper cover removed.
‹› Remove bolts - 2 -; - 7 -; - 9 - and - 10 -.
‹› Note the different lengths of bolts - 9 - and - 10 -.