A8L V8-4.2L (BFM) (2004)
/Page-7809002.png)
^
Undo nut -1-, remove bolt -2- and remove both links -3- upward.
The slots in the wheel bearing housing must not be widened using a chisel or similar.
^
Unbolt connecting link of self-leveling sensor -1- from control arm.
^
Removing left and right connecting link -2-.
^
Unbolt air spring damper from control arm -3- and pull out.
^
Unscrew the bolts of the stabilizer bar bearing evenly 5 sums.
^
Remove plenum chamber cover.
^
Unclip and disconnect connector 4-.
^
Remove bolts -1-to-3-.
^
From the wheel housing side, press the mounting bracket out of the sockets on the body in the area of the connections.
^
Turn steering gear to left or right as far as the limit stop (removal of left/right air spring damper).
