A8L V8-4.2L (BFM) (2004)
Radiator: Removal and Replacement
Oil Cooler
Oil Cooler
-
Remove the engine. Refer to => [ Engine, Removing ] See: Engine/Service and Repair/Engine, Removing.
-
Remove the right exhaust manifold. Refer to => [ Exhaust Manifold ] See: Exhaust System/Service and Repair/Removal and Replacement/Right
Side Components.
-
Remove the oil filter housing. Refer to => [ Oil Filter Housing ] See: Engine/Engine Lubrication/Oil Cooler/Service and Repair.
-
Remove the oil cooler bolts - arrow - and oil cooler.
Installing
Installation is performed in the reverse order of removal, noting the following:
‹› Replace the gaskets and O-rings.
-
Install the generator.
-
Install the right exhaust manifold. Refer to => [ Exhaust Manifold ] See: Exhaust System/Service and Repair/Removal and Replacement/Right
Side Components.
-
Install the coolant pipe to the oil filter housing. Refer to => [ Coolant Pipe to Oil Filter Housing ] See: Coolant Line/Hose/Service and Repair.
-
Install the torque support. Refer to => [ Torque Bracket and Support Valve Assembly Overview ] See: Engine/Service and Repair/Torque Bracket
and Support Valve Assembly Overview.
Tightening Specifications
Tightening specifications, refer to => [ Oil Cooler Assembly Overview ] See: Oil Cooler Assembly Overview.