A8L V8-4.2L (BFM) (2004)
Front Engine Plate: Service and Repair
Front Sealing Flange
Special tools, testers and auxiliary items required
‹› Crankshaft holder (3242)
‹› Thrust piece (T40007)
‹› Hand drill with plastic brush attachment
‹› Protective eyewear
‹› Silicone sealant
Removing
-
Remove the front bumper.
-
Remove the lock carrier.
-
Remove the ribbed belt. Refer to => [ Ribbed Belt ] See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal
and Replacement/Ribbed Belt.
-
Remove the ribbed belt tensioner bolt - arrow - and tensioner.
-
Remove the cover for the lower idler pulley.
-
Remove the lower idler pulley bolt - arrow - and pulley.