A8L V8-4.2L (BFM) (2004)
-
Route the toothed belt in the following sequence: Crankshaft toothed belt gear - 5 -, eccentric roller - 4 -, tensioner - 6 -, left camshaft gear - 3 -,
coolant pump - 2 -.
-
Lastly, place the toothed belt on the right camshaft gear - 1 -.
-
Turn the tensioning lever twice at 40 Nm in the - direction of the arrow - to pretension the toothed belt.
‹› The next two illustrations are shown with the torque support bracket removed.
-
Insert a 5 mm hex wrench flat between the tensioning lever - 1 - and tensioning element piston - 2 -.