A8L V8-4.2L (BFM) (2004)
-
Tighten to 120 Nm
7
Seal
-
Always replace
-
To install, place into opening of fuel tank when dry
8
Right connector flange
-
Installation position, see Fig. 1
9
Fuel return line
-
To left fuel delivery unit
10
Fuel supply line
-
From left fuel delivery unit
-
To disconnect, press release button on connection piece
11
Suction jet pipe
-
For suction jet pump
-
To disconnect, press release button on connection piece
12
Fuel delivery line
-
From suction jet pump, left side
-
Clipped in on fuel delivery unit -Item 14-
13
Fuel filler pipe
-
From fuel filler tube
-
Clipped in on fuel delivery unit -Item 14-
14
Right fuel delivery unit
-
With Transfer Fuel Pump (FP) -G23-
-
Clipped in on mount -Item 1-
-
Various versions, allocation
-
Fuel Pump (FP) electrical testing
-
Checking residual pressure
Fig. 1 Installation Position Of Right Connector Flange
-
Insert new, dry seal for connector flange into opening of fuel tank.
-
Insert connector flange in fuel tank, note installation position:
The tab -2- on connector flange must lie between tabs -1- and -3- on fuel tank.