A8L V8-4.2L (BFM) (2004)
/Page-8235002.png)
‹› If measured value is 0 Ohms there is a short circuit. If measured value is Greater than 1K Ohms there is a open circuit in the wiring.
‹› To check resistance values "tank full" or "tank empty", the Fuel Level Sensor (G) must be removed. Refer to => [ Fuel Level Sensor 1, Left
Lever-Type Sensor ] See: Service and Repair/Fuel Level Sensor 1, Left Lever-Type Sensor and the floater of the sensor must be placed in upper or
lower end position.
‹› With Fuel Level Sensor (G) removed, the following values are obtained because of the greater deflection of the floater arm:
