A8L V8-4.2L (BFM) (2004)
Headlamp Switch: Procedures
Light Switch, Removing And Installing
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Press light switch -arrow 1- and at the same time turn it to right -arrow 2-.
-
Hold switch in this position.
-
Pull light switch out of switch housing -arrow 3-.
-
Disconnect electrical connector.
Installing
Install in reverse order of removal, noting the following:
-
Press switch into switch housing until catch engages.