A8L V8-4.2L (BFM) (2004)
/Page-1776003.png)
-
Mark the installed position of the transmission tunnel crossmember on the body.
-
Remove the left - 1 - and right - 2 - transmission bolts on tunnel crossmember.
-
Remove the transmission tunnel crossmember from the body - arrows -.
-
Lower or raise transmission accordingly with (V.A.G 1383 A) until transmission is horizontal in installation position again.
‹› The transmission must be level to check the axle oil.
‹› It must be raised or lowered accordingly with the (V.A.G 1383 A) after removing the tunnel crossmember.
