A8L V8-4.2L (BFM) (2004)
Tire Pressure Module: Service and Repair
Tire Pressure Monitoring Control Module
Tire Pressure Monitoring Control Module
Special tools, testers and auxiliary items required
‹› Torque wrench (5-60 Nm) (VAG 1783)
Removing
-
Remove the rear bench seat cushion.
-
Release and remove the electrical connector - 1 -.
-
Remove the nuts - 2 - and the tire pressure monitoring control module (J502) - 3 -.
Installing
Installation is performed in the reverse order of removal. Observe the following when doing so:
-
Tighten the nuts - 2 - to 1.5 Nm.