audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Raising Wheel Bearing Housing to Tighten Bolts (Control Position)|Page 5360 > < Raising Wheel Bearing Housing to Tighten Bolts (Control Position)|Page 5358

A8L V8-4.2L (BFM) (2004)

Page 4
background image

^

Drive centrifugal disc home as shown in the illustration.

Note: The centrifugal disc must be flush with the wheel bearing flange.

Fig. 4 Pressing wheel hub into 85 mm diameter wheel bearing 

Note: The reworked area of the wheel bearing outer race faces upward.

Raising Wheel Bearing Housing to Tighten Bolts (Control Position)|Page 5360 > < Raising Wheel Bearing Housing to Tighten Bolts (Control Position)|Page 5358