audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Procedures|Page 12680 > < Procedures|Page 12678
Page 3
background image

-

Remove rubber seal - 1 - on plenum chamber covers.

-

Remove plenum chamber covers - 2 - and - 3 -.

-

Remove dust and pollen filter.

  ‹› Cover air duct at air conditioner housing with clean cloth to stop anything falling in.

-

Remove wiper arms. Refer to => [ Windshield Wiper Arms ] See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Removal and
Replacement.

-

Remove the bolts at the left and right - arrows - for the cowl panel grille - 1 -.

 

The cowl panel trim could be damaged.

 

‹› Coat the transition between the windshield and cowl panel trim with some soapy water and carefully pull the cowl panel trim - 1 -

vertically out of the retainer on the windshield beginning at the edge of the window.

-

Carefully remove the cowl grille from the locking mechanism on the windshield.

-

Remove screws - arrows -.

Procedures|Page 12680 > < Procedures|Page 12678