A8L V8-4.2L (BFM) (2004)
-
Guide the release tool which fits the connector housing into release channel on connector housing.
-
Grasp contact at wire and push it gently into connector housing until it stops - arrow -.
‹› By pushing the contact in the direction of the connector housing, contact retaining tabs are lifted off the housing shoulder and can be released
using the release tool.
-
At the same time, push the release tool in the direction of the connector housing and pull the released contact out of the connector housing - arrow
-.
-
Remove the release tool after removing the contact from the housing.
Asymmetrical