A8L V8-4.2L (BFM) (2004)
-
This MMI screen will change to a "Standard" screen once all devices have been initialized
-
Rotate center control knob counterclockwise to move cursor on MMI screen downward until "Restart MMI" is highlighted
NOTE:
-
Some MMI components have not been updated at this point in the updating process
-
The MMI update process must be performed again
-
When "Restart MMI" is highlighted, press center control knob to select highlighted entry and wait for up to 2 minutes until MMI screen turns off
(goes black)
NOTE:
For remainder of MMI updating procedure, different MMI screens from previous screens will be shown
-
MMI screen will change to "Download Server" display and "CD ROM" entry will be highlighted
-
Press center control knob to select highlighted entry and MMI screen will change to "Reading Meta information"
-
Wait at least 20 seconds for "Reading Meta information" to be completed
-
MMI screen will change to "Release H2_D3_US_XXXX (or similar)" display and "Standard" entry will be highlighted
-
Press center control knob to select highlighted entry and MMI screen will change to "Standard" and a list of MOST components will appear