A8L V8-4.2L (BFM) (2004)
Heated Glass Control Module: Service and Repair
Heated Windshield Control Module
Special tools, testers and auxiliary items required
‹› Pry lever (80 - 200)
‹› Vehicle diagnosis, testing and information system (VAS 5051B)
Removing
‹› All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.
-
If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or "Guided
Functions" with the (VAS 5051B).
-
Remove battery. Refer to => [ Battery ] See: Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery.
-
Open the cover - 1 -.
-
Detach wire - arrow -.
-
Lift clip - arrow - with (80 - 200).