A8L V8-4.2L (BFM) (2004)
Removing
-
Switch off ignition.
-
Remove glove compartment.
-
Remove right footwell vent.
-
Disconnect harness connector - A - from sensor.
-
Turn sensor - 1 - in direction of arrow approximately 90°.
-
Take temperature sensor out of heating and A/C unit.
Installing
-
Install in reverse order of removal.
Interior Temperature Fan
-
Remove front A/C control head Climatronic Control Module (J255). Refer to => [ Front A/C Control Head Climatronic Control Module ] See:
Heating and Air Conditioning/Control Module HVAC/Service and Repair/Front A/C Control Head Climatronic Control Module.
-
Remove bolts - A -.
-
Pull Interior Temperature Sensor Fan (V42) - B - out of front A/C control head Climatronic Control Module (J255).
‹› When installing Interior Temperature Sensor Fan (V42), do not press on motor - C -, hold fan firmly at housing instead.