A8L V8-4.2L (BFM) (2004)
/Page-4161002.png)
‹› Wear limit: - a - = 5 mm.
-
With protective cap - 2 - installed, use the feeler gauge - 4 - to press the carbon brushes - 3 - down.
-
Push the protective cap off - arrow - until the bar of the protective cap presses the carbon brushes down.
-
Install the voltage regulator. Refer to => [ Voltage Regulator, Valeo Generator from 2007 ] See: Service and Repair/Voltage Regulator, Valeo
Generator From 2007.
