A8L V8-4.2L (BFM) (2004)
Relay Box: Procedures
Relay Panel In Right Footwell, Removing And Installing
Removing
-
Disconnect battery.
WARNING: When working on knee airbag, observe safety precautions for working on airbags.
-
Remove glove compartment.
-
Remove A-pillar trim.
-
Fold back floor covering.
-
Remove foot support.
-
Disconnect relay -1-.
-
Remove screws -arrows- and remove relay carrier from bulkhead.
-
Disconnect relays/fuses from relay carrier.
-
Unclip fuse boxes and relay carriers at relay carrier.
NOTE: Fuse/relay assignments
Installing
Install in reverse order of removal, noting the following:
-
Reconnect battery.
Tightening torque
Component
Nm
Relay carrier to body
9.5