A8L V8-4.2L (BFM) (2004)
/Page-4376008.png)
-
Unplug connector for fiber optic cable from appropriate control unit.
-
Release locking latch in fiber optic cable connector - arrow -.
-
Pull base module - 2 - for fiber optic cable from connector housing - 1 -.
CAUTION!
‹› Mark allocation of fiber optic cable - 5 - to the appropriate connector socket in base module - 1 - with colored mark.
‹› Note the arrows - 3 - for allocation on the base module "IN" and "OUT".
