A8L V8-4.2L (BFM) (2004)
Power Steering Pump: Removal and Replacement
Power Steering Pump Pulley
Special tools, testers and auxiliary items required
‹› spanner wrench (3212)
Removing
‹› Lock carrier is pulled toward the front. Refer to => [ Lock Carrier, Pulling Toward the Front ] See: Body and Frame/Lock Carrier/Service and
Repair/Procedures/Lock Carrier, Pulling Toward the Front.
‹› Ribbed belt is removed. Refer to => [ Ribbed Belt ] See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and
Accessories/Drive Belt/Service and Repair/Removal and Replacement/Ribbed Belt.
-
For removing and installing the bolts - arrows -, use the (3212) to counter hold.
Installing
‹› Installed position: Writing "front" indicates direction of travel
‹› Check the alignment of the ribbed belt. Refer to => [ Ribbed Belt Alignment, Checking ] See: Engine, Cooling and Exhaust/Engine/Drive Belts,
Mounts, Brackets and Accessories/Drive Belt/Testing and Inspection