A8L V8-4.2L (BFM) (2004)
The chamfer on triple roller star faces toward the axle shaft, this is used as an assembly aid.
-
Use the special tool shown in the illustration.
The (T10065/3) must not come in contact with the roller body.
-
Place the triple roller star on the axle shaft according to the mark and drive on until impact.
-
Circlip must engage audibly, triple roller star must lie against circlip with no gap.
-
Install the circlip.
1
Circlip pliers (commercially available)
-
Press 70 grams of high temperature grease from the repair kit into the triple roller joint.
-
Lightly lubricate the roller body
Make sure the roller body does not tilt!