A8L V8-4.2L (BFM) (2004)
Display on VAS 5051:
1 - Enter display group
-
Using the keypad -2-, enter "008" to select Display group 008 and confirm entry with Q button.
Display on VAS 5051:
-
Check display in display zone -1-.
^
Gas pedal not depressed: No reading
-
Slowly move accelerator pedal in direction of full throttle.
^
The reading must drop to 0 Ohms shortly after resistance to movement is felt at kick-down point.
-
Press the < button to exit from the function "08 - Read data block".
-
Select diagnosis function "06 - End output".
If the display values do not appear as described:
-
Unscrew bolts (arrows) and remove cover for kick-down switch.
-
Unplug electrical connector.
-
Connect multimeter to kickdown switch (resistance test range)
^
Specification: x ohms (no continuity)
-
Slowly move accelerator pedal in direction of full throttle.
^
The reading must drop to 0 Ohms shortly after resistance to movement is felt at kick-down point.
If the display values do not appear as described:
-
Replace kick-down switch